Reflective Tape For Trailers

Reflective tape, also known as retroreflective tape; With the continuous development of traffic, vehicle performance is getting better and better, traffic accidents have become the focus of the problem; reflective tape continues to mature, to prevent traffic accidents play an important role.

When driving at night or on a poor road, the driver is judged by what they see. For fast-moving vehicles, vehicles with reflective signs can show better visual information and help the driver make more accurate The judgment.

In all the major traffic accidents, large cars, including trucks and buses, related accidents occupy the main position. So most countries are regulated by large and medium-sized vehicles must be affixed with reflective tape.

Here are a variety of vehicle reflective tape paste example:

Three-wheeled vehicles, low-speed goods vehicles, bar-type general trucks, column-type semi-trailer paste example

An example of a three-wheeled vehicle side

Note: The length of the three-wheeled car body reflective markings (not including the interval) should not be less than 1.2m.

An example of the side of the truck that is less than 50% of the length of the truck

Note: the length of the trunk is 50% of the truck, the side of the body reflective logo should be continuous paste, paste the length of the length of the cargo compartment.

Examples of side-panel trucks and semi-trailer side stickers

Note: In addition to the three-wheeled car, the length of the trunk is less than 50% of the length of the truck and the side of the body structure of the continuous surface of the concrete mixer and special vehicles, other trucks and trailers side of the body reflective logo paste length (excluding the interval ) Should not be less than 50% of the length of the driver.

An example of a warehouse-type semi-trailer sticking

An example of a warehouse truck

An example of a closed van

Example of a van semi-trailer

Van low speed van

Tank type truck, tank semi-trailer paste example

Example of concrete mixing truck

When fitting, please note the following points:

1. Paste the location of the radiation reflective logo clean, no dust, no grease, no rust, no Alice lacquer layer, the job site to keep clean;
2. Humidity greater than 50% or rainy weather should not be pasted;
3. Wash with non-corrosive solvents, rinse with water and wipe clean water with a clean soft cloth;
4. Tear off the back sheet, gradually evenly attached to the specified location, and flattened with a device to ensure that no bubbles remain;
5. fit within 1 day recommended not to exposure, three days should not be car wash.

WEALLIGHT is engaged in research and development of reflective materials for many years the factory, a professional development and production team, to provide you with professional advice to buy.

WEALLIGHT produces a variety of reflective materials, including: DOT C2 Reflective tape, Reflective film, Reflective Tape For Clothing, Reflective Heat Transfer Vinyl, etc., can be customized, can also accept custom!

We offer free samples, would like to know more, now contact us! https://weallight.com

Find Me on WhatsApp: +86 186-5973-9121